Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
I downloaded the document. The manual was complete, well scanned and everything was legible. I could zoom in see what I needed to know. There's not much more that you can ask.
Text excerpt from page 85 (click to view)
1
An image is light or blurred entirely.
� Is the toner low? (Is "Toner Low" being displayed?) � Yes � No � No � Yes Supply a toner.
Is the specified paper being used? Use the specified paper. Is the lens of the LED head dirty? Clean the LED head.
� Yes � No
Is the LED head installed correctly? (Check the CN6 connector of the main control board.) � No Install the LED head correctly. Is the contact plate of the transfer roller in correct contact with the high-voltage power supply board? (See Figure 6-4 F .) Is the terminal of the EP unit in correct contact with the contact plate? (See Figure 6-4 A and B )? Contact the terminal correctly. Replace the transfer roller.
� Yes
� Yes
� No � Yes
� Has this error been recovered? � Yes � No End
Replace the EP unit.
� Has this error been recovered? � Yes End
Caution: After replacing the EP unit, reset the drum counter. (Refer to "Replacing the Drum Cartridge" in "User's Manual".)
� No Replace the main control board or high-voltage power supply board.